Canon1
New member
I have a NH TZ24DA subcompact (24 hp)with a 60 inch belly mower. I want a rotary mower for rougher work. Will this tractor support a 5 foot "bushhog" type mower or should I go with a four foot mower?
Mowing Rotary Mower Size
- Thread starter Canon1
- Start date
- Views: 1935
jwstewar
Elite Member
I have a TC24. It also has 24 HP. I run a 4' behind of it. Most of the time I could probably run a 5', but I did some cutting on Saturday that even my little 4' was bogging it and I had to slow down. First time I had ever done that. So power wise, I think you could probably use a 5' - maybe taking smaller bites. But weight wise, I don't think the TZ series could handle a 5' hanging that far back - even with the loader on. I think you had better stay with the 4'.
390GT
Silver Member
I agree with Jim. I have a 5' rotary that I use, without the loader on, the tractor (TC33) seems a little light in the front. Greg
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
If you were only clipping pasture grass on a flat land.. then 5' rotary is probably ok.. but 4' is going to be easier and safer.
Soundguy
Soundguy
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
If it waas just a hp issue.. you could always take a 4' cut with a 5' mower.. however inthis case.. it is coming down to a weight issue.. tail wagging the gog.. etc.
I think you are making a good choice ont he 4'
happy hunting!
Soundguy
I think you are making a good choice ont he 4'
happy hunting!
Soundguy