CntryDR
New member
Here is my version of the Sabre Samurai cutter.
I researched this attachment on this and other sites,saw what others had done and came up with this set up to work for my trail clearing needs.
I made a quick attach frame for my FEL, modified the supplied mounting bracket and added a hydraulic ram that can extend the cutter assembly out 30" from frame.
I tapped into my power beyond hydraulics that power my backhoe and used a flow controller to provide the proper Gpm. This way I can also run my bush cutter at PTO speed and lift the rockshaft arms as needed.
I have to tidy up some hoses yet to make a nice clean install but everything is working great.
It makes trail work or cleaning up the edges of woods roads a much easier and quicker thing to do!
I researched this attachment on this and other sites,saw what others had done and came up with this set up to work for my trail clearing needs.
I made a quick attach frame for my FEL, modified the supplied mounting bracket and added a hydraulic ram that can extend the cutter assembly out 30" from frame.
I tapped into my power beyond hydraulics that power my backhoe and used a flow controller to provide the proper Gpm. This way I can also run my bush cutter at PTO speed and lift the rockshaft arms as needed.
I have to tidy up some hoses yet to make a nice clean install but everything is working great.
It makes trail work or cleaning up the edges of woods roads a much easier and quicker thing to do!