Sand Barrels & Spreading Sand on Driveways

   / Sand Barrels & Spreading Sand on Driveways #11  
I wonder if a fertilizer spreader would work for large areas like a parking lot. Thinking of my church. Several guys have quads which are easier to transport than my BX or maybe a riding lawnmower.

Ron

Salt or icemelt possibly,
sand with or without salt is usually to wet and will pack and not flow
 
   / Sand Barrels & Spreading Sand on Driveways #12  
I wonder if a fertilizer spreader would work for large areas like a parking lot. Thinking of my church. Several guys have quads which are easier to transport than my BX or maybe a riding lawnmower.

Ron

I have successfully used a walk behind spreader, one pass does the trick!
I locked the wheels to have both engaged and simply walk it in one pass.
I use 1/4 " crushed stone (not sand) as sand washes away just too easily.
My result is what I call a 'salt and pepper' application.
Works for me.

Actually crushed mining 'slag' is better than crushes stone, bit more costly but much more effective INHO. (like $1.00 more per 60 lb bag.)
Over the last 4-5 years all I've needed was 1 bag or 2.

I'll add I do have a stash of dry sand but prefer the crushed slag.

LOL, I occasionally set my CUT in low 1 st gear and load the abrasive on the blower and simply walk behind and manually apply the abrasive traction grit.
Doing that I also use shoe/boot traction aids.

Must add that I have a steep drive that demands abrasive if I want to drive out.
 
   / Sand Barrels & Spreading Sand on Driveways #13  
I have a mile long gravel driveway. There is a deep valley near the middle. Snow melt drains down onto one side of the driveway in this valley. This can make a 100 foot ice skating rink on that part of the driveway. And it IS steep. I've always had a 4WD vehicle - know that this small section can be a problem - drive accordingly. I've never had a problem.

It's those few who come to visit. They see it coming - slow down - many times they slide sideways down this section.

I spread wood chips on this section. It takes half a dozen bucket loads to completely & adequately cover this entire section. The chips will usually stay put for the entire winter.

I tried ditching with limited success. The total solution would require a tracked backhoe with a jackhammer. Cost estimate - $3200.
 

Tractor & Equipment Auctions

Trailer Dolly (A47477)
Trailer Dolly (A47477)
2023 54' Hooklift Dumpster 15 Cubic Yard (A53422)
2023 54' Hooklift...
2014 MultiQuip WhisperWatt 40kW Three-Phase Diesel Generator (A55973)
2014 MultiQuip...
2018 Ford Fusion Hybrid Sedan (A55758)
2018 Ford Fusion...
2025 JOHN DEERE 408R LOT NUMBER 10 (A53084)
2025 JOHN DEERE...
2008 DOOSAN G25 GENERATOR (A55745)
2008 DOOSAN G25...
 
Top