Saw the NEW LARGER 35 Series Model 4535 and 5035 Mahindra Tractors Today...

[bindian]

I am curious how they get the extra 5 hp rating as both engines are the same displacement and compression ratio and share common design exhaust and intake systems. If it's just in the injection...makes you wonder if the 45hp could be tuned to 50 hp specs....

Kerry

It is all in the Tier IV engine's emission controls. After seeing a Tier IV, I am glad I got a Tier III in my 6520.
hugs, Brandi

 

[Owenslee]

It is all in the Tier IV engine's emission controls. After seeing a Tier IV, I am glad I got a Tier III in my 6520.
hugs, Brandi

Yet both the 4535 and 5035 have have Tier IV emmisions...The 5hp has to be from increased fuel from the pump.

I agree with you however that earlier emissions standards would have been preferable.

Kerry

 

[bindian]

I went to my dealer this morning for specs on the 5035 and the 4535. He only had specs on the 5035. So I called my friend in Tomball that is a tech guru for Mahindra and he stated he never heard of a 4535. Soooo...........how about a photo of a 4535?
hugs, Brandi

 

[Owenslee]

You need to find a better informed tech guy....

Note the reference at the bottom of the page:

Mahindra Tractors

Or contact Buck Bond at EFC Equipment EFCTRACTORS.COM

When I inspected both the 5035 and 4535 I did not have a camera in hand.

However, I'll post pictures as soon as I take delivery.

Keep in mind...both of these tractors have not been formally introduced by Mahindra and the 4535 may not be introduced in the US at all. Many dealers I have talked to in person or on the phone are not aware of either new tractor. But those who received the early demo models are aware and were very impressed...as I was.

Kerry

 

[bindian]

You need to find a better informed tech guy....

Note the reference at the bottom of the page:

Mahindra Tractors

Or contact Buck Bond at EFC Equipment EFCTRACTORS.COM

When I inspected both the 5035 and 4535 I did not have a camera in hand.

However, I'll post pictures as soon as I take delivery.

Keep in mind...both of these tractors have not been formally introduced by Mahindra and the 4535 may not be introduced in the US at all. Many dealers I have talked to in person or on the phone are not aware of either new tractor. But those who received the early demo models are aware and were very impressed...as I was.

Kerry

Kerry,
More photos would be great. Is that a side joystick for the loader? I gather since the 4535 will not be a production model here in the states, the tech guru in Tomball (whose projects are production units) wasn't brought into the loop with the marketing gurus, like a lot of the dealers. I did find out that the ML130SK loader on the 5035 is made by KMW, which, I think, is still in Kansas........at least on the spec sheet I got. This model is as mysterious as the 8560.
hugs, Brandi

 

[Owenslee]

Kerry,
More photos would be great. Is that a side joystick for the loader? I gather since the 4535 will not be a production model here in the states, the tech guru in Tomball (whose projects are production units) wasn't brought into the loop with the marketing gurus, like a lot of the dealers. I did find out that the ML130SK loader on the 5035 is made by KMW, which, I think, is still in Kansas........at least on the spec sheet I got. This model is as mysterious as the 8560.
hugs, Brandi

The loader does have a joystick mounted on a pedestal mounted to the front of the right fender. It is very comfortable compared to the loader mounted joystick of older models. I like the location.

What is interesting is that I also thought the loaders were made by KMW, but the two I saw were clearly marked "Made in Canada" on the data plate.

I have a copy of the full spec sheet for both the ML120 and the new ML130 if you need any specific specs on the 130. I don't have a scanner or I would download it.

BTW, On the data sheet it states: Model ML130 "For use on Model 4535 and 5035 4WD Tractors"

Kerry

 

[bindian]

I will see if I can get the KMW rep to chime in here. It might take a day or two.
hugs, Brandi

 

[bindian]

I will see if I can get the KMW rep to chime in here. It might take a day or two.
hugs, Brandi

Here is Jeremy's reply to my email was.............The cylinders are made in Canada. I know what the question is without looking. Lol
hugs, Brandi

 

[Owenslee]

Brandi...

Thanks for the clarification. It WAS the tags on the cylinders I noted.

Kerry

 

[MAHINDRA OF OHIO]

I wish KMW would use steal lines with rubbor hoses on all there loaders and have better hoses!