SC2400 Implement Control Valve

[oldgrizzlybear]

I just brought the implement control valve (loarder control) for my sc2400. The instructions that came with it is missing at least half the pages. Does some one have these instructions or know where on the internet they can be found?

 

[Gods Country]

Is this what you need?


View attachment 305328View attachment 305329View attachment 305330

 

[gtrippleb]

Is this what you need?


View attachment 305328View attachment 305329View attachment 305330

Thanks for posting this Gods Country. Did you get the technical manual from your dealer?

 

[Gods Country]

No, it was available for download for a short time.

 

[Will D]

This post helped me greatly. Thank you!!

 

[Will D]

I was able to find the part number for the Hydraulic line I need (1A7880-47930), but it's not available on the Yanmar Parts Site and I haven't been able to locate anyone online so far. Can anyone suggest an online dealer that would have this part?

 

[Gods Country]

I think your best bet is to contact a dealer, somewhere.

 

[gtrippleb]

Here's a break down of the SCV valve and piping. It looks to be reference number 7 from your other post.

View attachment 318537

You can get the part from Messick's which I think is still a supporter of the site. Here's their sc2400 cub cadet parts breakdown.
Sc2400

Click on Piping SCV from the Diagrams sections. Again, I believe it's part #7 from your other post. The part numbers don't match but there could have been a part number change. I don't see a picture online which would help but if you call their parts department, I'm sure they can help you out.

 

[Will D]

Thank you so much. Will give a local dealer a call in the AM. You are correct...there seems to be a change in the part number.

 

[Will D]

Looks like Yanmar has decided to supply this part only to their dealers.....couldn't order it from Messick's, but at least the part showed when you searched the correct number. Thanks for all of your help gtrippleb:thumbsup: