seat switch problem

[allthumbs23]

I had the right rear wheel off as I was trying to minimize the amount of slop in the hydraulic control lever. I cleaned alot of crud out while I was back there, and re set the locker bolt on the implement lowering rod, which looked like it had maybe slipped forward. All good, and I put it back together, but now the tractor shuts off if I leave the seat, whether I am in gear or not. Any ideas? I have kids and don't want to bypass the switch. Thanks

 

[allthumbs23]

NVM - there is a connection on the opposite left side under the seat switch in the wheel well that was partially disconnected. All is well.