_RaT_
Super Member
- Joined
- Apr 19, 2000
- Messages
- 5,813
- Location
- Peoples Republic of Northern CA.
- Tractor
- Kioti 3510-SE HST
Good price. The original sales price seems a bit high don't you think?
Selling NH TC 45
- Thread starter rmoory
- Start date
- Views: 1686
kensfarm
Veteran Member
I'm sure that 15' foot batwing finish mower cost a pretty penny when new.. maybe he listed the $30K for effect.
KensFarm
Would it be possible to get the phone # from your local Paper on that TC45D tractor.
I have been looking for about 2 months and have been reading all the forms here on tractorbynet and all of you have been great help.
I finally regestered today because i am getting serious about a tractor and i need to learn more about these things if i plan to buy one.
Would it be possible to get the phone # from your local Paper on that TC45D tractor.
I have been looking for about 2 months and have been reading all the forms here on tractorbynet and all of you have been great help.
I finally regestered today because i am getting serious about a tractor and i need to learn more about these things if i plan to buy one.
kensfarm
Veteran Member
I checked the paper this morning.. the ad is gone already.. good deals go fast.
Western_NYer
New member
Does the TC45 have enough PTO horsepower to pull a 15 foot batwing mower. This seems contrary to what I have seen otherwise on this subject. I thought 5 horsepower per foot of the mower was the rule.
jinman
Rest in Peace
- Joined
- Feb 23, 2001
- Messages
- 20,387
- Location
- Texas - Wise County - Sunset
- Tractor
- NHTC45D, NH LB75B, Ford Jubilee
</font><font color="blue" class="small">( Does the TC45 have enough PTO horsepower to pull a 15 foot batwing mower. This seems contrary to what I have seen otherwise on this subject. I thought 5 horsepower per foot of the mower was the rule. )</font>
For a finish mower, I think 2.5 hp per foot is reasonable. After all, I have seen plenty of 5 hp self-propelled mowers with 21" blades. Considering that the 5 hp mower has to pull itself and the 21" blade, I'd think the TC45 could pull a 15' batwing. Honestly, I think I'd like to see it and try it first. I think it's possible, but I'm sure it would be "performance challenged" in some circumstances. /forums/images/graemlins/smile.gif
For pulling a rotary cutter, I wouldn't consider anything greater than 8' on the TC45. That's about 5 PTO hp per foot.
For a finish mower, I think 2.5 hp per foot is reasonable. After all, I have seen plenty of 5 hp self-propelled mowers with 21" blades. Considering that the 5 hp mower has to pull itself and the 21" blade, I'd think the TC45 could pull a 15' batwing. Honestly, I think I'd like to see it and try it first. I think it's possible, but I'm sure it would be "performance challenged" in some circumstances. /forums/images/graemlins/smile.gif
For pulling a rotary cutter, I wouldn't consider anything greater than 8' on the TC45. That's about 5 PTO hp per foot.
