Share Pics of People Hauling or Towing Something Wrong

[Diggin It]

I've literally been towing, couldn't move the load forward and bought tongue weight...

Bought a few bags of concrete for just that purpose on one trip with the weight behind the trailer axle.

Those look like old stress cracks.

 

[Darryle]

That front drivers side trailer tire does not look like its doing well either

Combined with the tow vehicle only being a 1/2 ton

 

[Darryle]

And back to the regular presentation of those in humanity to beware of.....

Broke a long standing rule of mine and loaned out a trailor and got this back. As expected the guy had no idea how he loaded so much for the crack to happen. It痴 kind of in line with the jack.

View attachment 662373View attachment 662374

Be thankful, he rid you of that finger pinching SOB. I have replaced a few of those that had cracked, most cracked after hard turns while loaded heavily. I am curious when you replace it, if you won't do a little investigating, I would wager it's been there for awhile, he just pushed it past it's limit and exposed/extended the crack .

 

[kenmbz]

Does this help?View attachment 662023

Thank you !
Think it has wheels on the edges......

 

[kenmbz]

No, it was by hand with 250 men.

YouTube

I didn;t see any SMV signs

 

[Loaderman22]

Thank you !
Think it has wheels on the edges......

I'm guessing no, just due to how it's wider than the road, the wheels wouldn't do much most of the time. I assume there are purlins run side to side to pick up the outer "walls" and they rest on the deck of the trailer.

 

[TheFarmerInAdell]

LOL! The "10 tons" sign, is abs-o-lute perfection in this photo!

:laughing: I can't believe I missed that! It is pointing in the direction he came from. He probably didn't know he was over that. I'm wondering how he was planning on unloading those pallets :scratchchin:

 

[duramaxsky]

:laughing: I can't believe I missed that! It is pointing in the direction he came from. He probably didn't know he was over that. I'm wondering how he was planning on unloading those pallets :scratchchin:

One at a time by hand.

 

[Diggin It]

^^^^ Another brick in the walk.

 

[Loaderman22]

One at a time by hand.

Yeah, with all that weight, I think the floor it in reverse and stomp on the brakes unloading method is off the table!