Silinderrods bending ?

[DLTTrekkers]

Iwould like to know y ?

 

[JerryK]

If your FEL cyl's are bending, it is because someone is backdragging with the bucket with the cyl's extended. You can also bend your cyl rods by having too much hyd pressure. But you have to give us more into..... sorry....

 

[DLTTrekkers]

My theory is......silindermountingpoint .....piston.......gland........rodmountingpoint...........If all 4 is evenspread from each other is will be strong ...........If silinder is overextended(piston and gland together then at its weakest and any missalignment with the welding on of the ends of the silinder will help with the bending .

 

[JerryK]

Could be. Hard to trouble shoot long distance with no pictures or much info.... Sorry.....