Sep 10, 2009 / Skid Steer Quick attach specs #11 J jeffz1 New member Joined Jul 16, 2008 Messages 4 Location Texas Tractor Kubota l3400 Komatsu pc75 I would double check that bottom bend It should be 30 degrees
Sep 10, 2009 / Skid Steer Quick attach specs #12 mwb Platinum Member Joined Feb 28, 2008 Messages 650 Location Ottawa Ont Canada Tractor 3940HST Montana jeffz1 said: I would double check that bottom bend It should be 30 degrees Click to expand... That is correct, the bottom angle is 30 (or 60 or 120) degrees depending where you reference. Here is the spec sheet I used. Think I found this on this board originally. Cheers, Mike View attachment QA specs.pdf
jeffz1 said: I would double check that bottom bend It should be 30 degrees Click to expand... That is correct, the bottom angle is 30 (or 60 or 120) degrees depending where you reference. Here is the spec sheet I used. Think I found this on this board originally. Cheers, Mike View attachment QA specs.pdf
Sep 10, 2009 / Skid Steer Quick attach specs #13 JohninCT Platinum Member Joined Jul 10, 2001 Messages 720 Location Central CT Tractor Struck Magnatrac 6000, Kioti DK40SE Here is a link to the previous thread with the QA spec (SAE J2513) http://www.tractorbynet.com/forums/build-yourself/112570-skid-steer-quick-attach-plate.html
Here is a link to the previous thread with the QA spec (SAE J2513) http://www.tractorbynet.com/forums/build-yourself/112570-skid-steer-quick-attach-plate.html