Skid Steer Quick attach specs

[jeffz1]

I would double check that bottom bend It should be 30 degrees

 

[mwb]

I would double check that bottom bend It should be 30 degrees

That is correct, the bottom angle is 30 (or 60 or 120) degrees depending where you reference.
Here is the spec sheet I used. Think I found this on this board originally.

Cheers,
Mike
View attachment QA specs.pdf

 

[JohninCT]

Here is a link to the previous thread with the QA spec (SAE J2513)

http://www.tractorbynet.com/forums/build-yourself/112570-skid-steer-quick-attach-plate.html