ssrider
Member
- Joined
- May 8, 2014
- Messages
- 47
- Location
- East Selkirk, Manitoba
- Tractor
- 1963 massey 150, 1972 Dynahoe 190
I'd been looking for a set of used pallet forks for a while with no luck. So I decided to build my own. Most of the material was either 2 x 4 x 3/16 tubing or 3/16 plate. I'm happy with how they turned out. I've overloaded them on purpose and the machine will lift the back tires off the ground, very solid. Also made them fully adjustable for fork width.