Marveltone
Veteran Member
- Joined
- Jun 20, 2010
- Messages
- 1,483
- Location
- Somewhere north of Roseau, MN
- Tractor
- Fordson Major Diesel, McCormick Deering W4, Ford 1510, John Deere L111
Slip clutch maintenance
- Thread starter Agrantina
- Start date
- Views: 10198
OP
Agrantina
Platinum Member
Got the drive shaft off and put inside.. WOW-- one of the grease zerks had almost unscrewed all the way- just hanging on with one or two threads. Pretty lucky.. 
.. -- I will loosen the springs and slip both cluthes this spring-Just wish I had thought of taken the shaft off earlier this year and stored them inside... The tiller shaft is a binacchi but cant find out what the cuttery shaft is--it is a Big Bee 5FT rottary cutter any ideas???
AndyG
.. -- I will loosen the springs and slip both cluthes this spring-Just wish I had thought of taken the shaft off earlier this year and stored them inside... The tiller shaft is a binacchi but cant find out what the cuttery shaft is--it is a Big Bee 5FT rottary cutter any ideas???AndyG
Chilly807
Elite Member
My driveshafts come off and live indoors during the winter months, and the front halves come in after each use. I took the Eurocardan slip clutch apart and cleaned it up this fall before storing it, took about an hour.
Sean
Sean