was wondering if this might help the 47in work a little better. all comments suggested
Snowblower Impeller Kit
Snowblower Impeller Kit
Snowblower Impeller Kit
- Thread starter thetaxman
- Start date
- Views: 12378
kennyd
Advertiser
My neighbors 47 throws snow 30' at least-not sure how much more is needed...
etcallhome
Platinum Member
Same here , I 'm blowing snow 6-7' in height and back 20-30' . Not sure what you are trying to gain ?????
OrangeJbird
Silver Member
I had a 1/2" gap between the impeller and housing on my 59". I put strip of 1/4" thick high density plastic inside the housing as a liner. Riveted it in place. It made a world of difference. Almost tripled the distance of throw and prevented plugging in wet and light snow.
I believe the paddle kit will work for you. If you added a plastic liner too . . . I can imagine using less RPM and power to do the same work.
I believe the paddle kit will work for you. If you added a plastic liner too . . . I can imagine using less RPM and power to do the same work.
Pipestone Kid
Gold Member
Orangejbird, Where did you get the plastic? I would like to give that a try. Thanks
OrangeJbird
Silver Member
I cut it from leftover manger liner a local farmer had. Not sure where you'd find it in your area. Got an Ag. plastic dealer?
was wondering if this might help the 47in work a little better. all comments suggested
Snowblower Impeller Kit
I put that kit on a 42" Haban single stage thrower on a L&G tractor. It made a huge improvement... especially with wet snow.
My new rig has a JD 44" two stage with a plastic impeller. The shape of the impeller blades don't lend it to adding the kit... I wish it did.
If your JD 47" has a metal impeller you'll like the kit.
Clarence is a nice guy and ships promptly.
Pipestone Kid
Gold Member
Hound Dog
Member
Anyone in your neighborhood work on dirt track race cars? Some of them use the plastic in different thicknesses.
