snowblower ?

[1999cobra]

Is there a snowblower available for the CK20HSD ? Didn't see anything mentioned on the website...

Mike

 

[Bob_Skurka]

Any of the 3pt rear mounted snowblowers would fit. Given the available PTO hp of the CK20, a blower of about 48" to 54" would work great.

I'm not aware of any front mount blowers for the CK20.

 

[idkioti]

I bought a Lorenz for my LK3054XS. They make them for all sizes, both rear mounts and front with a kit. This is a very expensive blower however, but well worth it. Any 3 point should work as long as it is the right width and designed for your horsepower.
Schulte is another good brand.
Dan.

 

[Justaplain]

I ran a 60" with a Ford 17HP and a Cub 23HP in N NY. They both worked OK bcs

 

[SpinyMouse]

I run a Normand Econor 72" blower behind my LK3054XS. It's a great combination.

 

[wallace]

Is there a snowblower available for the CK20HSD ? Didn't see anything mentioned on the website...

Mike

Kioti does not make one for their tractors.
There is a Kioti dealer in Canada that has made and supplied them to dealers.
I know the name of the dealership is Egger Tractor if you can not find anything let me know and I will try to get a hold of them.

They also make a snow plow.

 

[dn58]

I run a Meteor 60" on my CK20HST. Works great.

 

[cag]

Where are you located Mike, maybe your in the same region as KiotiDave, I believe he carries the Normand econor snow blower and the E-60 would be what I'd recomend, I've use mine for two season now with no problem...

 

[CBB]

I run a Meteor 60" on my CK20HST. Works great.

Picture please.

 

[wallace]

Cobra
Are you looking for a front or rear blower?