Somehow I always get screwed-- HELP

[citytransplant]

With the shift lever (the one to the right of the steering wheel) in neutral, reach down with your left hand to the lever that selects hi or lo and be sure that the lever is FULLY ... POSITIVELY ... ENGAGED in one of the two ranges (hi or lo).

Then, try putting her in gear.

If my suggestion doesn't work, read this. Especially the post from Slacker where he talks about using a nail to substitute for a roll pin. Your problem, if it still exists, could be solved with a 3 cent nail.

Whatever the outcome, you must come back here and share it with us for good karma to come your way.

http://www.tractorbynet.com/forums/all-other-brands/110416-farmtrac-360-tlb-gear-selector.html

 

[ocaj11]

Just like someone to come on here complaining about their tractor issues and never come back to update the thread. Why do they expect expert help without followin-up?

I certainly wasted my time reading this one.

 

[g0705]

Are you for real, dont even know the model of your tractor, just move on and take someplace to fix it. If your for real, just fix it and move on. you can whine all you want, the out come is the same.

 

[LBrown59]

 

[kyspartan]

Are you for real, dont even know the model of your tractor, just move on and take someplace to fix it. If your for real, just fix it and move on. you can whine all you want, the out come is the same.

what a knobhead, read the whole thread

 

[kyspartan]

Just like someone to come on here complaining about their tractor issues and never come back to update the thread. Why do they expect expert help without followin-up?

I certainly wasted my time reading this one.

welcome to the Internet
heres your cookie