Source for "Kickout Ring" aka "Circular Cotter" ring/pin?

   / Source for "Kickout Ring" aka "Circular Cotter" ring/pin? #1  

joea99

Platinum Member
Joined
Sep 8, 2014
Messages
686
Location
Marbletown NY
Tractor
Kubota B21, JD 240GT
Looking for small quantity source for what are known as "kickout rings" a version of the circular cotter ring or pin. OD is a hair or two under 2 inches.

These are used to secure some pins on 3pt implements and I am bound to lose some one way or another. It is a lot easier to have spares on hand than to try and rig up a "it'll do for now" deal.

I've found some, but either too small or 100 minimum. There gotta be some, somewhere.
 
   / Source for "Kickout Ring" aka "Circular Cotter" ring/pin?
  • Thread Starter
#2  
Turns out Kubota has a part number for it 67156-34340. So, that settles that. Except, being as cheap as I am, I'll keep looking for substitutes.
 
   / Source for "Kickout Ring" aka "Circular Cotter" ring/pin? #3  
Check McMaster Carr. Should've a lot better prices:

 
   / Source for "Kickout Ring" aka "Circular Cotter" ring/pin?
  • Thread Starter
#4  
Check McMaster Carr. Should've a lot better prices:

Tried. A bit small.
 
   / Source for "Kickout Ring" aka "Circular Cotter" ring/pin? #5  
Looking for small quantity source for what are known as "kickout rings" a version of the circular cotter ring or pin. OD is a hair or two under 2 inches.

These are used to secure some pins on 3pt implements and I am bound to lose some one way or another. It is a lot easier to have spares on hand than to try and rig up a "it'll do for now" deal.

I've found some, but either too small or 100 minimum. There gotta be some, somewhere.
I think what you are referring to is called a lynch pin and you can find them at almost every farm store or Tractor supply etc.
 
   / Source for "Kickout Ring" aka "Circular Cotter" ring/pin? #6  





Sort of looks like they range from $2.25 to $2.75..... Bailing wire is probably only thing cheaper...
 
Last edited:
   / Source for "Kickout Ring" aka "Circular Cotter" ring/pin?
  • Thread Starter
#7  
. . .

Sort of looks like they range from $2.25 to $2.75..... Bailing wire is probably only thing cheaper...
It's the shipping that gets me. I'll just order some next time I need other parts.
 
   / Source for "Kickout Ring" aka "Circular Cotter" ring/pin? #8  
Not that I'd recommend it...

 
   / Source for "Kickout Ring" aka "Circular Cotter" ring/pin? #9  
Harbor Freight assortment in the barn and no complaints...
 
   / Source for "Kickout Ring" aka "Circular Cotter" ring/pin?
  • Thread Starter
#10  
Not that I'd recommend it...

I've got a box. Used a couple already, seem fine. I'd like them better if the pin had a flat on one side.
 

Tractor & Equipment Auctions

iDrive TDS-2010H ProJack M2 Electric Trailer Dolly (A59228)
iDrive TDS-2010H...
2005 JLG Skytrack 10054 10K Capacity Telehandler (A59213)
2005 JLG Skytrack...
2023 SNORKEL A46JRT ROUGH TERRAIN BOOM LIFT (A59823)
2023 SNORKEL...
Deere 310L (A53317)
Deere 310L (A53317)
2020 John Deere 304L Wheel Loader w/ LM90 Worksite Pro Bucket (A56438)
2020 John Deere...
UNUSED JCT 72" HYD 4N1 BUCKET (A52706)
UNUSED JCT 72" HYD...
 
Top