Kubotafan
Veteran Member
- Joined
- Jun 25, 2012
- Messages
- 1,524
- Location
- Nova Scotia, Canada
- Tractor
- G1800AWS, B3030HSDCC, L3540HSTCC, JD710A
I have a Split-Fire wood splitter that I use with my LX2610. I had previously used it on a B3030 and L3540 I once had. I would often be splitting word when I had a snowblower on back, and too early to remove it. I made an "A frame" so I could hang it off either my bucket with a center hook or my snow blade with a fabricated hook made from rebar. The hydraulic lines run to the rear remotes, and I only have to unplug two blower hydraulic lines and plug in the splitter to be in business. I can have it hooked up in less than 5 minutes. The blower is off the tractor now and I have a landscape rake on the back, but will try to attach pictures showing my setup. It works well for me.
Attachments
Last edited: