Spreader Spreaders

   / Spreaders #11  
I just bought a small cosmo including PTO shaft and agitator from agri-supply for about $260.
 
   / Spreaders #14  
I really have found my Heard Seeder to work well.
 
   / Spreaders
  • Thread Starter
#15  
Thanks for the tips.
I am following up on some of them.

Hillsequip - check your PM.
CCI - get me some detail info.

Now I have another problem....what do you look for in a basic spreader other than quality of construction (I told you I was stupid!)? I don't even know what questions to ask. Any advice?

thx again!
roger
 
   / Spreaders #16  
I bought the cosmo 500 from the local farmers coop. I think it was ~$300 with the agitator.
They were cheaper than the local tractor supply.
Atwoods would also have this spreader.
You probably want the 250 instead.

Fred
 
   / Spreaders #17  
Yes. Pellet lime should work well.

I have spread normal ag lime with it that I buy in bulk (a tri-axial dump trucks worth at a time).
You need to keep the ag lime dry and even then it sticks to the sides a bit. But its works.

The pelletized lime should be much easier to feed through the spreader.

Fred
 
 

Tractor & Equipment Auctions

2020 John Deere 450M Round Baler (A53485)
2020 John Deere...
2010 KMC 3376 Peanut Combine (A55314)
2010 KMC 3376...
2016 Dodge Journey SUV (A53424)
2016 Dodge Journey...
2007 DRAGON 150 BBL ALUMINUM VACUUM TRAILER (A55745)
2007 DRAGON 150...
2006 Gehl RS5-34 6,000lb 4x4 Rough Terrain Telehandler (A55851)
2006 Gehl RS5-34...
Adams 5T Pull-Type Fertilizer Spreader (A55314)
Adams 5T Pull-Type...
 
Top