Sticky left Brake??

[Eddie]

The left brake sticks and won't release on my YM1700. Any ideas????

Thanks

 

[1danny]

The shaft that goes through brake cover may be seized, take the cover off and free it up. This is a common problem on the YM1700. The brake shoes will stay with the cover when you pull it out.
Danny
Parker Equipment Co

 

[kayssupply]

Sounds like a job for ------PB Blaster. You might not have to take it apart. Try it first.

 

[Eddie]

OK, do I take just the outer cover off, or do I take the entire assembly off, with the four bolts, back to the rear end housing????

 

[1danny]

Just take the outer cover off, read my first post.
Danny
Parker Equipment Co

 

[Eddie]

Thanks Danny,
I wasn't sure what you were calling the cover. It's a project for tomorrow.

 

[Eddie]

That was an easy fix. Works good as new!!!!