Still no luck finding aux. wires on my BX22

[bellweather]

With apologies to Jim Becker, I still can’t seem to locate the aux connectors for hooking up a work light. After digging, and picking away at the electrical tape and corrugated plastic wire-harness shield, and generally making a mess of things (see attached pic), I still uncovered no connectors. So either my BX22 has no aux connectors, or I’m looking in the wrong place or else I’m just giving up to easily. It is a really tight spot …there is zero slack in the wire harness, and it is tightly wedged between that hydraulic pipe and the chassis. Any suggestions would be most welcome. Thanks.

 

[Junkman]

pluck out the red wire that is sticking out and you will have it. It is bundled in the harness where it forms a "t" or "y"... your choice of letters depending on how you look at it...

 

[jpr62902]

Here's a pic of my wiring before I stuffed it in that corrugated flex pipe. Hope it helps!

 

[bellweather]

Thanks for the help guys. I am assuming that the red wire in question is actually the red and black striped wire? I guess I need to do a little more surgery to free everything up. Kubota sure makes this hard.