mcnitt
Silver Member
I am inspired by your friend's generousity and your tenacity!
Still tractoring
- Thread starter rpraymond
- Start date
- Views: 4852
OP
rpraymond
Silver Member
- Joined
- Dec 24, 2006
- Messages
- 218
- Location
- Madison Co., central NY
- Tractor
- Kubota L3430HSTC, Kubota B2320 w/FEL, Allis-Chalmers D10
TripleR, I will take some pictures tomorrow & post them after dinner.
smstonypoint
Super Member
- Joined
- Oct 13, 2009
- Messages
- 6,119
- Location
- SC (Upstate) & NC (Piedmont)
- Tractor
- NH TN 55, Kubota B2320 & RTV 900, Bad Boy Outlaw ZTR
This thread jogged my memory regarding The Toolbox: Techniques and Suggestions
It looks like the publications at the site provide some ideas that might prove useful to TBN members and others with physical disabilities.
Steve
It looks like the publications at the site provide some ideas that might prove useful to TBN members and others with physical disabilities.
Steve
OP
rpraymond
Silver Member
- Joined
- Dec 24, 2006
- Messages
- 218
- Location
- Madison Co., central NY
- Tractor
- Kubota L3430HSTC, Kubota B2320 w/FEL, Allis-Chalmers D10
TripleR, here are some pictures. I use a power chair so I'm not sure how much muscle would be required for a manual chair. The ramp brings me right up level with the cab so I can just step into it. There's enough room on the landing to spin around and drive down the ramp. I've tried it about a half dozen times and it works fine.
If you need any more info let me know.
I sent my friend the link to this post and he was excited to see all the responses.
If you need any more info let me know.
I sent my friend the link to this post and he was excited to see all the responses.
Attachments
TripleR
Super Star Member
- Joined
- Mar 5, 2009
- Messages
- 18,538
- Location
- Missouri
- Tractor
- Kubota M8540HDC, L5740HSTC, BX2200, BX2660, John Deere 425&1025R, Case, Massey Ferguson, Ford
Thanks for the photos, he sure did a good job on it.
I am using a regular chair now when I have to travel any distance and my wife pushes it as my shoulders are shot from falling down.
I will someday have to get a power chair, so the incline won't be a problem. I now drive my Rhino or Grizzly down to the barn where we keep the tractor. In looking at the ramp it occurred to me that I could use the general design to work with a power chair as well as my Rhino.
We keep our M8540 four miles away at another farm and could build one up there and use the Rhino or figure out a way to transport the chair.
I hope I won't need one of these for a while, but I didn't think a year ago I would trade my cane in for crutches. I know the time will come and I will be able to "keep on tractoring"; thanks.:thumbsup:
I am using a regular chair now when I have to travel any distance and my wife pushes it as my shoulders are shot from falling down.
I will someday have to get a power chair, so the incline won't be a problem. I now drive my Rhino or Grizzly down to the barn where we keep the tractor. In looking at the ramp it occurred to me that I could use the general design to work with a power chair as well as my Rhino.
We keep our M8540 four miles away at another farm and could build one up there and use the Rhino or figure out a way to transport the chair.
I hope I won't need one of these for a while, but I didn't think a year ago I would trade my cane in for crutches. I know the time will come and I will be able to "keep on tractoring"; thanks.:thumbsup:
bigbull338
Elite Member
3R no matter how your health gets i hope you can keep running your tractors.i to will prolly be in your shape 1 of these days.an like you i hope i keep going.
Bob77064
Elite Member
rpraymond, that's great that your friend did built that.
Here are some similar links:
