nfernandez
Bronze Member
All, I went to my local TSC, and several auto parts stores and can't find any SAE 90 gear oil. I just purchased an older Ber-Vac 60" snowblower and it says the gear oil needed is SAE 90. Can I use something different?
suggested gear oil is SAE 90, but I can't find any
- Thread starter nfernandez
- Start date
- Views: 16369
Dftodd
Super Star Member
- Joined
- Oct 19, 2014
- Messages
- 10,422
- Location
- vilonia, arkansas
- Tractor
- Massey Ferguson 1825E, Kubota Z121S
90 weight is actually 80w90:thumbsup:
newbury
Super Star Member
- Joined
- Jan 8, 2009
- Messages
- 14,795
- Location
- From Vt, in Va, retiring to MS
- Tractor
- Kubota's - B7610, M4700
Usually you have some wiggle room for temperature variations, but your range is pretty narrow in winter.
75w-90; 80w-90 are very common & so long as theres adequate expansion room in the gearbox & mnfctr doesn't shun use, either should be fine if straight 90 is hard to find.
75w-90; 80w-90 are very common & so long as theres adequate expansion room in the gearbox & mnfctr doesn't shun use, either should be fine if straight 90 is hard to find.
Katahdin
Platinum Member
SAE 90 at TSC is labeled Ford Tractor Transmission Fluid. I use it in an older truck.
Traveller® Ford Tractor All Mineral 90 Transmission Fluid, 2 gal. - Tractor Supply Co.
Traveller® Ford Tractor All Mineral 90 Transmission Fluid, 2 gal. - Tractor Supply Co.
yelbike
Veteran Member
- Joined
- Nov 7, 2011
- Messages
- 1,639
- Location
- Near Winnipeg, Mb, Canada
- Tractor
- John Deere 2305, 2320,Z465
I was going to say Walmart. My king mutter tiller requires 90w also, found it at Walmart.
OP
nfernandez
Bronze Member
Thank you all for your help. Now for a followup question, how full do you fill the gearbox? I don't see a dip stick or window that shows how full it is. Attached is an image of the gearbox.
Katahdin
Platinum Member
Typically you fill it up as high as the hole that the square plug threads into. Once the gear oil starts spilling out of that hole, its full.
