swinger loader 200 series

[smokeytires]

hello
I'm looking for information on the pump on a swinger loader 200 series. it runs the loader hydraulics can't find a tag on it. does anyone know what size pump goes on this any information would be appreciated

 

[Vigo327]

I didn't know what a Swinger 200 was a minute ago and I kind of wish i still didn't because now i want one..

If you know the pump rpm, the cylinder diameter and stroke for one of the things it powers (lift, curl, etc) you can probably roughly ballpark the GPM of it by timing a stroke of one of the cylinders or pairs of cylinders and putting that through an online calculator. But if you're trying to find details like a repair kit or parts for the pump.. no help here, sorry. Maybe now that i want one I'll learn some more, though..

 

[duster333]

hello
I'm looking for information on the pump on a swinger loader 200 series. it runs the loader hydraulics can't find a tag on it. does anyone know what size pump goes on this any information would be appreciated

Hey good to get in contact with you since I own a SWINGER loader that does have the pumps on it but is missing the rear axle and transfer case. I can give you what info I have on my pumps if you can do same for me on the axle and transfer case.

 

[Swinger_Parts_4_Sale]

Hello,
I stumbled onto your post about looking for swinger loader parts, if you are still needing parts feel free to send me a message, I may be able to help you. I used to work for the company that manufactured the Swinger loaders before they were discontinued and obtained a lot of the information, build sheets, material list, vendor/supplier information and lots of other stuff. I am currently in the process of having some of the more common parts & obsolete parts reproduced based off original drawings & specifications.