tail lights

[young2]

Maybe someone from homier is looking at this board. I need both right and left side tail light assembly but on their web sight they list two that look the same but are different part numbers on them
both tail lights on a 2003 farmpro they list them as 16.48.33 and a c207-003 which on or dose it matter? I need the whole assembly. I e-mailed them an the reply was they both were wrong? I tried to call but after 20 mins. wait I get a little up set. I noticed that they are a lot cheaper then others. listed around 14.00 for the whole thing everyone else is around 20 some a each this is on a 2425 farmpro

 

[Diamondpilot]

You get what your pay for. Yes some of the other Jinma dealers may be a little more but they will answer the phone and you will get them in 2-3 days. Call a good dealer like Affordable or Ranch Hand and be done with it. Your time is more valuable than the few buck you will save and I guarantee you they will be cheaper on the shipping. Both of these dealers have always treated me well and shipping is very cheap and fast.

Chris

 

[young2]

I did buy mine from a dealer but you have to remember that in 2003 their were a lot of dealers. The one that I bought it off of always told me to call homier. Until I started looking to the net I was lost. I have had very few problems with the tractor. I have bought parts from both of the dealers in your post. I would say that the reason that you bought your tractor was the price. I would have loved to have had a dealer in the area like the ones in your post.Yes they are very good at what they sell an service.My hat off to them.

 

[Diamondpilot]

I did not mean to sound harsh. I just meant they never return calls, ect. My time is valuable to me so I know the guys I mentioned above are fair and I don't question their prices. If we don't support them we will all have tractors that are impossible to get parts for not to mention the mounds of knowledge and free advise.

I bought my tractor from Homiers also. Actually picked it up sight unseen at the place where they assemble them at and I was not impressed. But like you said the price could not be matched and I am pretty handy with a wrench so it has worked out great. I am located less than 45 miles from the headquarters in Huntington, IN. I have never gotten good service from them so I did as you did and found some other to notch dealers via this site and others to get the parts I needed as I go along.

Chris

 

[Affordable]

We have the right parts for your tractor and offer same day shipping in most cases, we also answer the phone 8-5 pm M-F and Sat until 1-2 pm,are we the cheapest prob. not but we try to be competive as we can. Our parts inventory is very large and with Jinma changing parts all the time and the part # s are the same we know what you are wanting most of the time and can help you get it.99.5 % of our customers love us because we can help you through a problem and ship you the parts, plus we have the factory building some drive assemblies for us so that you can replace a assembly cheaper than buying all the parts seperatly for the not so mechanical guys.Give us a try I'm sure you will be happy with our service,Thanks again Diamondpilot for referring us.

Tommy
Affordable Tractor Sales
Home of compact Jinma, Foton, and Koyker Tractors and Parts, Wood Chippers, Backhoes - Affordable Tractor Sales Company