TC 29 hydro pressure
- Thread starter general J
- Start date
- Views: 5215
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
general J said:Hi I am a newbi to the TBN. I would like to thank everyone for the information that they posted on this site but I would like a little more (a little greedy I know)I have recently purchased a used TC29 Hydro trans and noticed that it wont back up a hill that it will drive forward up. Is there a port that I can test pressures and what pressures should I expect because it sounds as if the hydro is bypassing when I try to back up the hill. Thanks for any info you can give me on this.
Hmm.. I'd get rid of my gear tractor if it had that kind of a problem. I'll have to file this one away in my list of reasons to NOT own a hydro trans tractor...
List is so far, way thicker than the list of reasons of to own one... so far..
soundguy
daTeacha
Veteran Member
I think it's the hydro equivalent of a gearing issue. They are also designed and built with a stop below the pedal to keep you from going too fast in reverse, although some here have modified that part a bit.
As for hydro vs. gear, each has it's adavantages and disadvantages. I like the fine control the hydro offers in many situations but still find myself wanting the pure lugging abilities of a gear tranny now and then. I still think my B7100 would have outpulled the DX29 in certain circumstances like dragging logs uphill.
As for hydro vs. gear, each has it's adavantages and disadvantages. I like the fine control the hydro offers in many situations but still find myself wanting the pure lugging abilities of a gear tranny now and then. I still think my B7100 would have outpulled the DX29 in certain circumstances like dragging logs uphill.
dqdave1
Veteran Member
Please don't get me wrong. My hydro will back up in all ranges. But if under certain loads ( ie; full bucket) I may have to drop one range to move it in reverse. Nedium range in forward and reverse are "geared differently".
