I am going to be putting out for bids on a new tractor and the tc 40d was one of them I was looking at. It will spend about 75% of it's time on turf moving dirt,fertilizing,ariatting ball fields,and 25% for snow removel on asphalt, and grading parking lots. I was wondering what tires I should spec. for this combination.
tc 40D
- Thread starter Lee
- Start date
- Views: 1984
Hawgee
Silver Member
- Joined
- Apr 8, 2000
- Messages
- 227
- Location
- East of Seattle, Washington
- Tractor
- 64 MF Utility 35 retired to parts pile.
I'm looking at the same rig. Hard to get the spec's on them around here. Keep us informed on what you find.
On the tires, I have never used them but the local golf course uses a "Bar tread" that is a little more aggressive than a turf but less than the R-4 industrials. The bar is as wide or wider than the R-4 and is run with low psi. This is the tractor they use for sanding and has a lite footprint for the finished fairways. Chains would be a easy add on if the snow got too deep.
"What is a weed? A plant whose virtues have not yet been discovered."
Ralph Waldo Emerson (1803-1882)
On the tires, I have never used them but the local golf course uses a "Bar tread" that is a little more aggressive than a turf but less than the R-4 industrials. The bar is as wide or wider than the R-4 and is run with low psi. This is the tractor they use for sanding and has a lite footprint for the finished fairways. Chains would be a easy add on if the snow got too deep.
"What is a weed? A plant whose virtues have not yet been discovered."
Ralph Waldo Emerson (1803-1882)
Lee,
While R4 Industrial tires would be a logical choice for an average mix of chores, I would think about going with turf tires for the following reasons:
With a tractor the size of the TC40, R4 tires may cause more damage to your turf than you would like. It sounds like this is for a school/field type of use. It is probably part of the job to keep the turf in good shape, and an R4 tire with the weight of a TC40 on it might just tear that turf up a little too much. However, long stretches of straight-line mowing/driving would reduce that, as R4 tires have been known to be rough mainly on turns. But, only you can decide that, so it is probably a good idea to demo one with R4 tires, first.
Also, it sounds like your needs for high traction will be less than low-damage. You can add a set of chains for traction in snow if you choose turf tires.
I hope this helps,
<font color=blue>>></font color=blue>Muhammad
<font color=blue>Forum Master</font color=blue>
While R4 Industrial tires would be a logical choice for an average mix of chores, I would think about going with turf tires for the following reasons:
With a tractor the size of the TC40, R4 tires may cause more damage to your turf than you would like. It sounds like this is for a school/field type of use. It is probably part of the job to keep the turf in good shape, and an R4 tire with the weight of a TC40 on it might just tear that turf up a little too much. However, long stretches of straight-line mowing/driving would reduce that, as R4 tires have been known to be rough mainly on turns. But, only you can decide that, so it is probably a good idea to demo one with R4 tires, first.
Also, it sounds like your needs for high traction will be less than low-damage. You can add a set of chains for traction in snow if you choose turf tires.
I hope this helps,
<font color=blue>>></font color=blue>Muhammad
<font color=blue>Forum Master</font color=blue>