TC29D Hst Pedals Sticking

[Carl G]

1999 29D and the hst pedal sticks in fwd and reverse. I took the spring out and it seems fine. Greased everything and adjusted, but the pedal still stays whichever way it’s pushed. I also unhooked the wiring to the cruise since it wanted to stay engaged once pushed. Am I missing another adjustment point? Do I need to replace something?

 

[Halftrack]

One of the things I did concerning the cruise control sticking was to glue 3 or 4 short strips of a nylon zip tie to the surface of the cruise magnet. It still holds when energized but releases cleanly when shut off.

 

[ruffdog]

Did you lube the shaft that the cruise paddle rides on? There is also a damper (sba378910020) that slows the pedal movement. Then there is the peddle centering device that has a spring, rod, and guides inside and it is suppose to get the pedal to neutral when released.

 

[ruffdog]

Here is a thread:

TC33D Hydrostat pedal linkage. Tractor moves forward when clutch is let out in gear

Look at post #7 (picture) and see detail "A".....that is the centering device.

 

[Carl G]

Did you lube the shaft that the cruise paddle rides on? There is also a damper (sba378910020) that slows the peddle movement. Then there is the peddle centering device that has a spring, rod, and guides inside and it is suppose to get the peddle to neutral when released.

I adjusted and greased this spring. The further down I went with the nut, the more the forward pedal would come back to center. But reverse wouldn’t and there was less travel for reverse.
I think this is the centering device?
Where would I find the damper?
The cruise is completely unhooked. I had to use a screwdriver to release the magnet from the pedal. Something is wrong with the return for that.

 

[ruffdog]

Damper is item 11 in your picture.

New Holland/Case: DAMPER, Part # SBA378910020

 

[Carl G]

Damper is item 11 in your picture.

New Holland/Case: DAMPER, Part # SBA378910020

Damper is item 11 in your picture.

New Holland/Case: DAMPER, Part # SBA378910020

Awesome thank you. Is there adjustments on it? I hope

 

[Carl G]

Damper is item 11 in your picture.

New Holland/Case: DAMPER, Part # SBA378910020

That looks like it’s just a shock?

 

[Halftrack]

Further thought on the issue, and I recall the cruise control plate was rubbing on the fuel tank. I had to remove it and grind it down to provide more clearance.

 

[t_bois1]

Damper is item 11 in your picture.

New Holland/Case: DAMPER, Part # SBA378910020

OUCH! $217.00 for a damper?