TC33D Dashboard

   / TC33D Dashboard #1  

Florida_Farmer

Bronze Member
Joined
Jun 30, 2002
Messages
74
Location
Central Florida
Tractor
841 Powermaster, TC33D, TC40 DA, Yanmar 1500, Yanmar 2210B, Scag Turf Tiger, Exmark 72" Lazer Z
Took off my dash to change out the flasher module but the retainer nuts that were in the fiberglass cracked off on both sides - I guess it's age or something.. any idea how to repair it or find a auto clip that might hold it in tighter?
It sits ok without falling out but I need to fix it but would prefer not to buy a new dash cowling...

Thanks
 
   / TC33D Dashboard #2  
To change the flasher module, I thought all you had to do was take off the panels underneath the dash, not the dash itself? :confused:
 
   / TC33D Dashboard
  • Thread Starter
#3  
Started there but 2 screws on the dash looked much easier - and did provide easy access to the module - only problem was the brittleness of the fiberglass. Otherwise, would have been 3 minutes and done...!
 
   / TC33D Dashboard #4  
Not sure what the problem looks like but I've had good results making repairs with Super Glue or epoxy glue. As long as there is a good surface to work with.
You can also find a hefty selection of automotive clips at any good parts store.
 
   / TC33D Dashboard #5  
Mine has cracks showing around holes also; not sure but is it possible to drill new hole, countersink them and and hold it in a different location? Glue will probably just crack again.
 
   / TC33D Dashboard
  • Thread Starter
#6  
Thanks - not much left to work with - I'll take a picture but I think I'm going to use a little PVC glue and stick a small tab on to screw to.
I'll let you know how it turns out..!
 
   / TC33D Dashboard #7  
I guess you could use a washer on a flathead screw so it grabs some good material.
 
   / TC33D Dashboard #8  
A plastic welder would be best. I think Harbor Freight carries an inexpensive one. I know that they carry the plastic welding rod.
JB Weld another option.
 
   / TC33D Dashboard
  • Thread Starter
#9  
Thanks - good suggestions - I'll look into the plastic welder - sounds interesting
 

Tractor & Equipment Auctions

UNUSED Heavy-Duty Ratchet Load Binder/Chain Set (A50860)
UNUSED Heavy-Duty...
2019 CATERPILLAR 299D3 SKID STEER (A50458)
2019 CATERPILLAR...
2018 JCB 3TS 8T TELESCOPIC SKID STEER (A50458)
2018 JCB 3TS 8T...
1269 (A50490)
1269 (A50490)
2013 John Deere 608C combine head (A50657)
2013 John Deere...
2008 Ford F-250 4x4 Reading Service Truck with Liftgate (A48081)
2008 Ford F-250...
 
Top