Tech Question

   / Tech Question #1  

Anonymous Poster

Epic Contributor
Joined
Sep 27, 2005
Messages
29,678
I was down in some mushy dirt with the Bx22 when I was trying to pull out, but the wheels would not turn over, I couldent figure out what was wrong, I looked down and noticed that I was in high gear, put it in low, pulled right out.
I dont guess any damage can occur from this, or can it?
Im paranoid..
 
   / Tech Question #2  
Nothing to worry about. Lots of us have done the same thing (at least I think lots besides myself have done it). /forums/images/graemlins/wink.gif
 
   / Tech Question #4  
Garrabo:

Just don't sit there stalled with the pedal depressed. When you do that all of the driving power from the hydro transmissiom is converted to heat which could eventually do damage. But not to worry, you would have to sit for many minutes trying to drive but stalled, in order to heat things too much.
 
   / Tech Question
  • Thread Starter
#5  
thats a relief, I only tried twice before discovering low gear.
thanks for the help
 

Tractor & Equipment Auctions

ITEM LOCATION LOT NUMBER 3 (A53084)
ITEM LOCATION LOT...
2016 JLG 3248RS 32ft Electric Scissor Lift (A50322)
2016 JLG 3248RS...
Test Button (A47477)
Test Button (A47477)
2013 INTERNATIONAL 7500 SBA 6X4 DUMP TRUCK (A51406)
2013 INTERNATIONAL...
Ford Super Duty Pickup Truck Bed (A52377)
Ford Super Duty...
2018 GENIE GTH-5519 TELESCOPIC FORKLIFT (A52706)
2018 GENIE...
 
Top