Ted from Everything Atttachments has a close call:

[lilranch2001]

1000% agree.

I see absolutely no reason for this to have been "staged." It serves not his purpose of selling attachments in any way whatsoever. He has many videos displaying his actual products doing their thing that are far more effective, informative, and viewed. If this was a "publicity stunt" it's one that only an idiot would come up with...

Personally, I think he just had a dumb arse attack

 

[leonz]

Check out this video:

EverythingAttachment's Channel - YouTube

I wonder if he will spend the money on the full plate count rear weight kit for both sides which is recommended anyway as it it is the only effective counterbalance to the overhung load of the bucket?


If you look closely at the lower left hand side of skid steer you will see
where the weight plates can be/are attached/bolted to the right side of these models to counter the effects of an overhanging load and keep the tires on the ground. The left side has the same mounting attachment for plate weights as well.


I am certainly glad he was not hurt doing this for sure!!!!

Not to nit pick, but it was obviously staged as the grapple fit nicely in the valley of the drainage ditch and the boom arms allowed it to stay directly in the center of the ditch and the long palm tree itself prevented the skid steer from tipping sideways as it tipped forward as well.

One begs to wonder why he did not cut the palm tree up into smaller bolt lengths to keep the load centered within the skid steer loaders circumference.
As other have mentioned he has not run these machines very much as you never never run around with load in the air unless and until you are ready to dump it.

 

[20 20]

I wonder if he will spend the money on the full plate count rear weight kit for both sides which is recommended anyway as it it is the only effective counterbalance to the overhung load of the bucket?


If you look closely at the lower left hand side of skid steer you will see
where the weight plates can be/are attached/bolted to the right side of these models to counter the effects of an overhanging load and keep the tires on the ground. The left side has the same mounting attachment for plate weights as well.


I am certainly glad he was not hurt doing this for sure!!!!

Not to nit pick, but it was obviously staged as the grapple fit nicely in the valley of the drainage ditch and the boom arms allowed it to stay directly in the center of the ditch and the long palm tree itself prevented the skid steer from tipping sideways as it tipped forward as well.

One begs to wonder why he did not cut the palm tree up into smaller bolt lengths to keep the load centered within the skid steer loaders circumference.
As other have mentioned he has not run these machines very much as you never never run around with load in the air unless and until you are ready to dump it.

:thumbsup: :thumbsup: very well written