The 2720 has arrived.

   / The 2720 has arrived. #11  
Nice tractor! But I'm more jealous of that shop! :drool:
 
   / The 2720 has arrived. #13  
Very nice. Is that the drive over deck type mmm? Let the fun begin. :thumbsup:
 
   / The 2720 has arrived. #14  
Great looking tractor. I had one with fel and bh.this is one tough little-big tractor. I did not have (0) problems with mine.
 
   / The 2720 has arrived. #15  
Nice tractor and nice shop (By looking a your shop I sure that your tractor will get the same treatment):thumbsup:
 
   / The 2720 has arrived. #16  
I have never seen OSB for flooring, Nice tractor :thumbsup:


I haven't used OSB for flooring but I do recognize that the better cabinet and furniture shops use wood floors. Less chance of damage to wood pieces if dropped on the floor.
 
   / The 2720 has arrived.
  • Thread Starter
#17  
I haven't used OSB for flooring but I do recognize that the better cabinet and furniture shops use wood floors. Less chance of damage to wood pieces if dropped on the floor.


Thanks everyone.

The OSB has held up very well for the flooring. I build the building in 1991. I put 2 coats of polyurethane on the OSB then & have done nothing to it since.

Wood floors are also easier on dropped tools & my legs & knees.
 
   / The 2720 has arrived. #18  
Nice looking tractor. You will love the difference between the 2320 and the 2720. Also the 655 tiller is great piece of equipment.
 
   / The 2720 has arrived. #19  
Nice carts for the mower and tiller.

I traded in a 2305 and took delivery of my 2720 in late October 2011. Mowed the grass once before it went dormant for the winter.

Only problem so far is the misalignment of the holes for the ROPS pins. I keep a large rubber mallet handy.
 
   / The 2720 has arrived. #20  
Thanks everyone.

The OSB has held up very well for the flooring. I build the building in 1991. I put 2 coats of polyurethane on the OSB then & have done nothing to it since.

Wood floors are also easier on dropped tools & my legs & knees.

I can for sure understand that, my shop is all cement and a 8 hour day out in is tough on the joints. But i weld mostly so a wood floor would be a option.
 

Tractor & Equipment Auctions

Case-IH 180 Magnum (A57148)
Case-IH 180 Magnum...
GMC 2500HD 4wd Service Truck (A56436)
GMC 2500HD 4wd...
INTERNATIONAL EAGLE ROAD TRACTOR (A52707)
INTERNATIONAL...
500BBL WHEELED FRAC TANK (A58214)
500BBL WHEELED...
Adams Load Out Conveyor - Stainless Steel Assembly - Baldor Electric Motor (A56436)
Adams Load Out...
Unverferth Road Runner Head Cart (A59814)
Unverferth Road...
 
Top