mike69440
Elite Member
- Joined
- Jun 2, 2005
- Messages
- 3,310
- Location
- Central NH (God's Country)
- Tractor
- 2005 L39 Kubota, 2020 Polaris 570 Sportsman, 2006 RTV 900, 2019 RTV1100C, 1997 Komatsu PC75UU2E w/ Thumb & Blade, 2013 Mahindra Max28XL Shuttle plus many attachments
Purchased from USA attachments:
http://www.excavatorthumb.com/mt824_mini_excavator_thumb.html
Make sure you prefit all the pieces together, as the fitment is rough. I ended up welding up a few of the loose pin holes and grinding the tight ones for a good fit.
Also you need to special order the attachment bracket at 2.62 wide for a good fit to the BH boom arm. Wider and you will need to modify something.
I figure that's about a 1,000 LB rock in the claw.
http://www.excavatorthumb.com/mt824_mini_excavator_thumb.html
Make sure you prefit all the pieces together, as the fitment is rough. I ended up welding up a few of the loose pin holes and grinding the tight ones for a good fit.
Also you need to special order the attachment bracket at 2.62 wide for a good fit to the BH boom arm. Wider and you will need to modify something.
I figure that's about a 1,000 LB rock in the claw.