lzicc
Platinum Member
I am going to be inheriting a Thomas T133 s Skid steer. The quick attach bucket has a single handle. Is there a conversion that would convert it to a regular skid steer QA without removing the factory QA?
Thomas Skid Steer QA
- Thread starter lzicc
- Start date
- Views: 10551
MORRISONSTEEL
Platinum Member
Is this a "mini" skid steer? Not that familiar with them but Thomas has a fair amount of dealers that should be able to help. I think you can get adapters from thomas to go back and forth from std to mini.
Xfaxman
Super Star Member
- Joined
- Feb 8, 2013
- Messages
- 12,870
- Location
- Guthrie, OK
- Tractor
- Toolcat 5610 G - Bobcat V417 - TORO+Loader
It would be easier to just do a quick mod to the attachments. You could just drill out the side plate (if it has one) or weld on locking tabs. This place may have a better idea.....http://www.thomasloaders.com/
http://www.thomasloaders.com/upload_files/manuals/133 Parts Manual (SN LE000537-LE002182).pdf (sec. 1.3)
OP
lzicc
Platinum Member
Thanks Xfax. That may work. I can't believe how expensive they are.
DDbackhoe, thanks for the parts manual. I may be able to fabricate something from that.
DDbackhoe, thanks for the parts manual. I may be able to fabricate something from that.
