Threads on KAMA Rear Remotes

   / Threads on KAMA Rear Remotes #1  

3RRL

Super Member
Joined
Oct 20, 2005
Messages
6,931
Location
Foothills of the Giant Sequoia's, California
Tractor
55HP 4WD KAMA 554 and 4 x 4 Jinma 284
Anybody know what threads are on the rear remotes on a KAMA KM554? I want to remove the rear remotes QD and thread the hose ends into another fitting. They appear to be 22mm x 1.5mm pitch but I'm just guessing. Where would I get a coupler to go from that thread to say a 1/2NPT?

Also, what about the ports on the rear remote valve to those hoses, what thread are they?
Thanks,
 
   / Threads on KAMA Rear Remotes #2  
as I recall 22mm 1.5 is correct. We have adaptors to 1/2NPT available.
 
   / Threads on KAMA Rear Remotes
  • Thread Starter
#3  
bluechip said:
as I recall 22mm 1.5 is correct. We have adaptors to 1/2NPT available.
Thanks Chip,
The Metric thread that screws into the rear remote valve...is it Male or Female?
Thanks,
 
   / Threads on KAMA Rear Remotes #4  
The quick connect has a female thread which attaches to the male thread on the tractor. I am talking about the quick connects not the valve under the floor. the fitting has a 1/2" male thread and you can mount a pioneer type quick connect in its place. The valve has female ports, but I am unsure the size, some are banjo type fittings also.
 

Tractor & Equipment Auctions

71057 (A49346)
71057 (A49346)
2019 John Deere 8295R MFWD Tractor (A50657)
2019 John Deere...
2009 JOHN DEERE 135D EXCAVATOR (A51242)
2009 JOHN DEERE...
TOYOTA 42-6FGCU25 LP SIT DOWN FORKLIFT (A50854)
TOYOTA 42-6FGCU25...
2013 CHEVROLET SILVERADO 2500HD (A50854)
2013 CHEVROLET...
Craftsman T1800 42in. Riding Mower (A49346)
Craftsman T1800...
 
Top