Threads on KAMA Rear Remotes

   / Threads on KAMA Rear Remotes #1  

3RRL

Super Member
Joined
Oct 20, 2005
Messages
6,931
Location
Foothills of the Giant Sequoia's, California
Tractor
55HP 4WD KAMA 554 and 4 x 4 Jinma 284
Anybody know what threads are on the rear remotes on a KAMA KM554? I want to remove the rear remotes QD and thread the hose ends into another fitting. They appear to be 22mm x 1.5mm pitch but I'm just guessing. Where would I get a coupler to go from that thread to say a 1/2NPT?

Also, what about the ports on the rear remote valve to those hoses, what thread are they?
Thanks,
 
   / Threads on KAMA Rear Remotes #2  
as I recall 22mm 1.5 is correct. We have adaptors to 1/2NPT available.
 
   / Threads on KAMA Rear Remotes
  • Thread Starter
#3  
bluechip said:
as I recall 22mm 1.5 is correct. We have adaptors to 1/2NPT available.
Thanks Chip,
The Metric thread that screws into the rear remote valve...is it Male or Female?
Thanks,
 
   / Threads on KAMA Rear Remotes #4  
The quick connect has a female thread which attaches to the male thread on the tractor. I am talking about the quick connects not the valve under the floor. the fitting has a 1/2" male thread and you can mount a pioneer type quick connect in its place. The valve has female ports, but I am unsure the size, some are banjo type fittings also.
 

Tractor & Equipment Auctions

2015 Ford Expedition EL XLT SUV (A50324)
2015 Ford...
2006 Ford Crown Victoria Sedan (A50324)
2006 Ford Crown...
2012 BROCE BROOM (A50854)
2012 BROCE BROOM...
1998 Kenworth Tandem Grain Truck (A50514)
1998 Kenworth...
2003 FONTAINE TL50-NGB TRI AXLE RGN TRAILER (A51222)
2003 FONTAINE...
2016 John Deere TS Gator Utility Cart (A48082)
2016 John Deere TS...
 
Top