acohen100
Silver Member
I was trying to do some chipping today and noticed that the chipper was bogging down. I checked the RPMs and they had slid down from 3100 to about 2800. I kept increasing the throttle but every time I did it would start at, say, 3100 or so but then quickly drift back down to the 2800-2900 range until, eventually, I had the throttle wide open. This was making it difficult to run the chipper and I stalled several times.
Any ideas?
BX24 with about 80 hours.
Any ideas?
BX24 with about 80 hours.