Tiller tiller for Super A

[showcattle]

It should be fine, as he said he has sand and the ground has been worked in the past. Most folks til at too slow of a speed anyway, destroying their soil structure!

Also, the A does have a 4 speed tranny...

SR

I'm worried about stalling the engine because ground speed is too fast.

 

[bigtiller]

If the ground speed is too fast, the tiller can't dig-in to bog the engine down. It will float/bounce on top of the ground and try to push you faster.

 

[Sawyer Rob]

Why can't I till the same ground two times if it does not do the job on the first pass. That is what I do with the disc.

You can, and in most cases, SHOULD! Instead of crawling along pounding the soil to death!

SR

 

[Walter Bostic]

Just got back so, sorry I am late responding. Looks like I am back where I started. I do not want to have to purchase a tiller to determine if it will work on the tractor. Does anyone have a super A with a 4ft tiller?

 

[Sawyer Rob]

I agree that most people over till and destroy the soil structure, rarely do I see anyone but myself use the higher ground speeds in my locale.

That said, with only 16 hp. at the pto. and 2.3 mph in 1st gear the engine may have a hard time with a 48" tiller.

Almost all of my custom tilling is at about 2.5mph and one of my tillers is a 42" Howard, that I run with 12.5 pto hp tinker toy tractor... It does just fine, so I don't see a super A having trouble with a 48" tiller, in sand no less and sand is easy to till!...

SR