tilt-tatch

[albert]

Anyone have experience using a tilt-tatch on a Toolcat? Interested in perhaps using one with my clamshell bucket to help crown my road and establish drainage ditches.

 

[ruffdog]

I always thought that a tilt-tatch would be very useful. I too would use it to maintain my driveway crown. I know xfaxman has one.

 

[ruffdog]

Post 8 in this thread:

really awesome/ handy attachments

 

[Xfaxman]

Anyone have experience using a tilt-tatch on a Toolcat? Interested in perhaps using one with my clamshell bucket to help crown my road and establish drainage ditches.

Yep, it should work good for that.
Here is mine:

With the Land Plane:

 

[npalen]

Yep, it should work good for that.
Here is mine:
View attachment 758563View attachment 758564View attachment 758565

With the Land Plane:

View attachment 758567View attachment 758568View attachment 758569

Tilt-Tatch and Power Latch! That is not fair!

 

[Xfaxman]

Tilt-Tatch and Power Latch! That is not fair!

For those not familiar with Bob-Tach:

 

[npalen]

For those not familiar with Bob-Tach:View attachment 758577

I did a TBN search a while back to find a couple threads where guys custom fit cylinder(s) to their SSQA to convert to "Bob-Tach" but no luck. Anyone point me to those threads?

I see that Bobcat also has automatic attachment of hydraulic couplers for 3rd function attachments. Can't seem to find it right now.

 

[ptsg]

I did a TBN search a while back to find a couple threads where guys custom fit cylinder(s) to their SSQA to convert to "Bob-Tach" but no luck. Anyone point me to those threads?

I see that Bobcat also has automatic attachment of hydraulic couplers for 3rd function attachments. Can't seem to find it right now.

Here are a couple of those threads about hydraulic conversions, even one with an electric actuator:

Linear actuator for power SSQA?

I've been getting kind of lazy swapping between pallet forks & my bucket. This has resulted in me dropping the forks once or twice because I forgot to latch down the SSQA levers. Doing a setup like Power Bob-Tach Bob-Tach Attachment Mounting System - Bobcat Company would be pretty cool. I...

www.tractorbynet.com

Hydraulic Quick Attach

I didn't start out to make a hydraulic quick attach, or even a quick attach. I started to make a grapple. But after taking off the factory 4-pin bucket to make some measurements, I changed the plan. The bucket (212 lbs) was easy enough to put back on, the flat bottom makes it scootable. But...

www.tractorbynet.com

L5030 Trima/SMS Quick Attach adding hydraulic implement locking

Will add a hydraulic cylinder to the existing QA lock mechanism. Using a small cylinder I already have but will have to weld on attachment points. More photos will be posted as the project progresses. Br /Marcus EDIT: The tractor thread is here ...

www.tractorbynet.com

 

[albert]

Can anybody point me to a used Tilt-Tatch for sale? I'm convinced.

 

[Xfaxman]

Can anybody point me to a used Tilt-Tatch for sale? I'm convinced.

Call skid steer dealers in your area and ask them.

 

[Xfaxman]

Here is a new one: https://www.machinerytrader.com/listing/for-sale/210117767/2022-bobcat-tilt-tatch-other