bher
Bronze Member
I just got a tiltmeter from the link on TBN. I have a TC29D and was wondering where others mounted the meter on their Boomers. I looked around for a place and nothing jumped out at me. Suggestions appreciated.
tiltmeter mounting location
- Thread starter bher
- Start date
- Views: 878
Brant, I was in such a hurry to experiment with the tiltmeter on my property that I just cinched it down with two plastic zip ties on the bar that runs over the top of my dashboard from the loader frame. It works fine, and I've never made it more permanent.
Leef
Leef
Anonymous Poster
Epic Contributor
- Joined
- Sep 27, 2005
- Messages
- 29,678
mike does the hood hit the tilt meter when you open it up
Kent
Bronze Member
On the FEL bracket
I have a TC-40D, and the 16LA loader brackets are perfectly vertical, which is a requirement of the tilt meter I have. And just a little wider than the meter. Peel and stick. It is a little low and off to the side, but out of the way for the 99.999% of the time I don't look at it.
I have a TC-40D, and the 16LA loader brackets are perfectly vertical, which is a requirement of the tilt meter I have. And just a little wider than the meter. Peel and stick. It is a little low and off to the side, but out of the way for the 99.999% of the time I don't look at it.