Time to change the clutch

[mffarmall]

Got it all done. Thank you for the information. This took me about 20 steps. And I did not understand everything until I could see it. Now that I am getting everything back together my lights and rear light will not turn on. I need to check my fuses.

 

[mffarmall]

I took her on a road test and she did great. After I got her all done. I degreased and power washed her. I'm going to leave the cover off for a week or two. That way I can get at the glow plugs and all the little things that I can see now.

I checked my fuses no problems. I'm thinking I need to check my wiring to the gen.

 

[Rich Waugh]

Glad to hear you got it running right!

 

[mffarmall]

One last need. My shuttle shifter handle. I need to get a new pin b4x20. Anyone know a pin or bolt size that will complete the connection so I don't have to buy a 50cent and 300 in mail cost?

 

[greg_g]

shuttle shifter? or gear shifter? (I didn't know shuttle was even available on the 2425). The gear shifter should take a B6x45. Or if you mean range selector, that takes a nested pair: B4x30 inside a B6x30. And don't use bolts, the threads chew up the soft steel inside the pin holes - eventually adding slop to the lever motion.

//greg//