tool box ideas for 3x20 tractors

[454shooter]

I mounted 2 small ammo cans through the existing holes in the rops, on the outside, directly below the flashers. I drilled through the cans and put a long bolt through them. I use them for carrying chains so I took the lids off and drilled holes in the bottom for drainage. Larger ammo cans with lids could have been used for toolboxes.

 

[454shooter]

I mounted 2 small ammo cans through the existing holes in the rops, on the outside, directly below the flashers. I drilled through the cans and put a long bolt through them. I use them for carrying chains so I took the lids off and drilled holes in the bottom for drainage. Larger ammo cans with lids could have been used for toolboxes.

 

[Buckie]

hi. could you tell me what those brackets are that are holding the box against the Imatch? am trying to figure out how to mount my tool box and can't see what they are from the photo. thanks

 

[Buckie]

hi. could you tell me what those brackets are that are holding the box against the Imatch? am trying to figure out how to mount my tool box and can't see what they are from the photo. thanks

 

[al3]

Quick hitch---see pic. Chains easily at hand & saves the tractor fenders from abuse.

 

[al3]

Quick hitch---see pic. Chains easily at hand & saves the tractor fenders from abuse.

 

[JD3520]

The brackets are just square c-clamp type bolts I bought at Ace Hardware; a local hardware store. about $3-4 each I believe. I drilled four holes in the box. Careful to place a flat piece of metal on the inside of the box to avoid warping it. I really like al3's heavier duty boxes.

 

[JD3520]

The brackets are just square c-clamp type bolts I bought at Ace Hardware; a local hardware store. about $3-4 each I believe. I drilled four holes in the box. Careful to place a flat piece of metal on the inside of the box to avoid warping it. I really like al3's heavier duty boxes.

 

[jmt1271]

jd3520-

how do you like your bb2060 boxblade? i just traded up to one and got an iMatch.

 

[jmt1271]

jd3520-

how do you like your bb2060 boxblade? i just traded up to one and got an iMatch.