toolbox ideas

   / toolbox ideas #1  

bdog

Elite Member
Joined
Mar 26, 2004
Messages
2,628
Location
Texas
Tractor
John Deere 6130M
I am wanting to mount a small toolbox on my tractor for the things I always seem to need such as hammer, pliers, crescent wrench, etc. I am just curious as to what you guys have used and how and where you mounted them.
 
   / toolbox ideas #2  
I know PineRidge has a nice simple bolt on mount. I built one that went across the lower part of my rops using the rops bolts. I did not have my box blade center link yet. I got my center link and well lets just say there is a dent in my tool box. /forums/images/graemlins/grin.gif
 
   / toolbox ideas #3  
Ain't that what the bucket's for??
 
   / toolbox ideas #4  
here's a photo of an old ammo box i mounted to my ROPS with 2 square U-bolts...simple and effective...

speaking of that...does anyone have a place where you can buy ammo boxes online cheep?

ammo-box.jpg
 
   / toolbox ideas #6  
If you have a kubota, you don't need a toolbox. /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif

Bill
 
   / toolbox ideas #7  
</font><font color="blue" class="small">( If you have a kubota, you don't need a toolbox. /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif
Bill )</font>
Well with my K I dont need the tools but I need the chain and the come a long to get the **** thing unstuck about every 4 hours. /forums/images/graemlins/tongue.gif /forums/images/graemlins/grin.gif
Steve
 
   / toolbox ideas #8  
Do some searching on this forum for "Rops Rack." You should get lots of posts explaining how to make one of these. Easy to do -basically bolt on some angle iron using U-bolts. Then I used a larger-sized ammo box that I attach to the Rops rack with a bungie cord. (the box sits on top of the rack). Simple and effective. The only thing I had to modify was to remove the triangle reflector from the back of my seat.
 
   / toolbox ideas #9  
Mathey -

Hey - what's that 3 point gizmo on the back of your tractor?
And I like your tool box.
 
   / toolbox ideas #10  
Never mind - I now see it's a Brush hawg - didn't have my coffee yet my eyes were a little fuzzy this morning.
 

Tractor & Equipment Auctions

2017 Yamaha VX1050B Deluxe Jetski (A50324)
2017 Yamaha...
2025 REDEDLIFT CPD25-XD4 FORKLIFT (A51222)
2025 REDEDLIFT...
2008 Ford F-450 4x4 Tow Service Truck (A49461)
2008 Ford F-450...
2021 Case IH Magnum 240AFS CVX Connect MFWD Tractor (A50657)
2021 Case IH...
1991 International 4900 Box Truck (A51039)
1991 International...
2017 DITCH WITCH RT30 RIDE-ON TRENCHER (A51242)
2017 DITCH WITCH...
 
Top