toolbox ideas

[bdog]

I am wanting to mount a small toolbox on my tractor for the things I always seem to need such as hammer, pliers, crescent wrench, etc. I am just curious as to what you guys have used and how and where you mounted them.

 

[notamustang]

I know PineRidge has a nice simple bolt on mount. I built one that went across the lower part of my rops using the rops bolts. I did not have my box blade center link yet. I got my center link and well lets just say there is a dent in my tool box. /forums/images/graemlins/grin.gif

 

[bobodu]

Ain't that what the bucket's for??

 

[mathey]

here's a photo of an old ammo box i mounted to my ROPS with 2 square U-bolts...simple and effective...

speaking of that...does anyone have a place where you can buy ammo boxes online cheep?

 

[Scozz]

Try www.cheaperthandirt.com they used to have a few different sizes. Havent been there recently though .. Scozz

 

[kubotabilly]

If you have a kubota, you don't need a toolbox. /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif

Bill

 

[notamustang]

</font><font color="blue" class="small">( If you have a kubota, you don't need a toolbox. /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif
Bill )</font>
Well with my K I dont need the tools but I need the chain and the come a long to get the **** thing unstuck about every 4 hours. /forums/images/graemlins/tongue.gif /forums/images/graemlins/grin.gif
Steve

 

[jyoutz]

Do some searching on this forum for "Rops Rack." You should get lots of posts explaining how to make one of these. Easy to do -basically bolt on some angle iron using U-bolts. Then I used a larger-sized ammo box that I attach to the Rops rack with a bungie cord. (the box sits on top of the rack). Simple and effective. The only thing I had to modify was to remove the triangle reflector from the back of my seat.

 

[GuglioLS]

Mathey -

Hey - what's that 3 point gizmo on the back of your tractor?
And I like your tool box.

 

[GuglioLS]

Never mind - I now see it's a Brush hawg - didn't have my coffee yet my eyes were a little fuzzy this morning.