Toolcat Hydraulic Fluid Specs.

   / Toolcat Hydraulic Fluid Specs. #1  

Dakota Kid

New member
Joined
Mar 30, 2017
Messages
8
Location
Parts Unknown
Tractor
New Holland TC30 (x3) , Ford 3910 w/FWA, New Holland 9030 Bidiretional, Bobcat Toolcat 5610.
Any one know what Bobcat calls for on hydraulic fluid specs? Bobcat seems to be elusive on there specs. Here's my situation, I have a 5610 toolcat with rear hydraulics that shares front and rear attachments with 5 other Ford/Newholland tractors, three of them are hydrostats. I obviously have cross contamination of oil to my toolcat. I use Traveller Premium universal tractor trans/hydraulic fluid from TSC in my tractors, It does list and meet ford/newholland specs on the label of the jug.
I'm looking to use a universal fluid that I can use in all my equipment. Any one use none-bobcat fluid in your toolcats? I'm open to any advice or suggestions from you other Toolcat users, I'm currently at a point where I need to add fluid to my toolcat due to a blown hose on the grapple fork.
 
   / Toolcat Hydraulic Fluid Specs. #2  
Any one know what Bobcat calls for on hydraulic fluid specs? Bobcat seems to be elusive on there specs. Here's my situation, I have a 5610 toolcat with rear hydraulics that shares front and rear attachments with 5 other Ford/Newholland tractors, three of them are hydrostats. I obviously have cross contamination of oil to my toolcat. I use Traveller Premium universal tractor trans/hydraulic fluid from TSC in my tractors, It does list and meet ford/newholland specs on the label of the jug.
I'm looking to use a universal fluid that I can use in all my equipment. Any one use none-bobcat fluid in your toolcats? I'm open to any advice or suggestions from you other Toolcat users, I'm currently at a point where I need to add fluid to my toolcat due to a blown hose on the grapple fork.
If your Toolcat is not new and not still under warranty your good to go with the Travllers . :thumbsup:
 
   / Toolcat Hydraulic Fluid Specs. #3  
Recommended ISO viscosity grade (VG) and viscosity index (VI)

VG 100; Minimum VI 130 for 40F to 120F
VG 46; Minimum VI 150 for -40F to 80F
 
   / Toolcat Hydraulic Fluid Specs.
  • Thread Starter
#5  
Thanks for the impute Jabonee , I topped it off with TSC Traveller. Just like the idea of using the same fluid as in my other equipment.
 

Tractor & Equipment Auctions

4 Unused Montreal ST205/75R15 Trailer Tires (A55787)
4 Unused Montreal...
2020 John Deere 304L Wheel Loader w/ LM90 Worksite Pro Bucket (A55315)
2020 John Deere...
2016 Ford Expedition SUV (A55853)
2016 Ford...
2015 Ford Explorer XLT 4X4 SUV (A56859)
2015 Ford Explorer...
Toro hr:2213.5 (A56859)
Toro hr:2213.5...
SAMSUNG REFRIGERATOR / FREEZER (A54757)
SAMSUNG...
 
Top