Toolcat Hydraulic Fluid Specs.

   / Toolcat Hydraulic Fluid Specs. #1  

Dakota Kid

New member
Joined
Mar 30, 2017
Messages
8
Location
Parts Unknown
Tractor
New Holland TC30 (x3) , Ford 3910 w/FWA, New Holland 9030 Bidiretional, Bobcat Toolcat 5610.
Any one know what Bobcat calls for on hydraulic fluid specs? Bobcat seems to be elusive on there specs. Here's my situation, I have a 5610 toolcat with rear hydraulics that shares front and rear attachments with 5 other Ford/Newholland tractors, three of them are hydrostats. I obviously have cross contamination of oil to my toolcat. I use Traveller Premium universal tractor trans/hydraulic fluid from TSC in my tractors, It does list and meet ford/newholland specs on the label of the jug.
I'm looking to use a universal fluid that I can use in all my equipment. Any one use none-bobcat fluid in your toolcats? I'm open to any advice or suggestions from you other Toolcat users, I'm currently at a point where I need to add fluid to my toolcat due to a blown hose on the grapple fork.
 
   / Toolcat Hydraulic Fluid Specs. #2  
Any one know what Bobcat calls for on hydraulic fluid specs? Bobcat seems to be elusive on there specs. Here's my situation, I have a 5610 toolcat with rear hydraulics that shares front and rear attachments with 5 other Ford/Newholland tractors, three of them are hydrostats. I obviously have cross contamination of oil to my toolcat. I use Traveller Premium universal tractor trans/hydraulic fluid from TSC in my tractors, It does list and meet ford/newholland specs on the label of the jug.
I'm looking to use a universal fluid that I can use in all my equipment. Any one use none-bobcat fluid in your toolcats? I'm open to any advice or suggestions from you other Toolcat users, I'm currently at a point where I need to add fluid to my toolcat due to a blown hose on the grapple fork.
If your Toolcat is not new and not still under warranty your good to go with the Travllers . :thumbsup:
 
   / Toolcat Hydraulic Fluid Specs. #3  
Recommended ISO viscosity grade (VG) and viscosity index (VI)

VG 100; Minimum VI 130 for 40F to 120F
VG 46; Minimum VI 150 for -40F to 80F
 
   / Toolcat Hydraulic Fluid Specs.
  • Thread Starter
#5  
Thanks for the impute Jabonee , I topped it off with TSC Traveller. Just like the idea of using the same fluid as in my other equipment.
 

Tractor & Equipment Auctions

2016 John Deere HPX 4x4 Gator (A47307)
2016 John Deere...
Lonestar Panel w/ Gate (A49339)
Lonestar Panel w/...
John Deere 4230 (A47307)
John Deere 4230...
2024 Ford F-350SD Lariat (A43476)
2024 Ford F-350SD...
2020 Ford F-150 XL (A47307)
2020 Ford F-150 XL...
2017 Toro Top Dresser 2500 Model 44507 S/A Towable Trailer (A46683)
2017 Toro Top...
 
Top