Top-n-Tilt kit from Kubota?

[Anonymous Poster]

HI,

The manager at the Kubota dealership where I bought my B2910 is new to Kubota, coming to this store from their other store, which sells blue.

He told me he thinks that Kubota sells a top-n-tilt kit for the B2910, and that he would research it and let me know the options.

Do any of you guys use/know of such an animal? I have read in the archives about people making there own setups. I would prefer to buy a kit if one was available...

Does anyone know if Kubota does offer a top-n-tilt kit? Or if kits [as compared just component parts] from a third party?

Grateful for any help/advice you can offer.

Thanks...Bill in Pgh, PA

 

[Anonymous Poster]

I'd also be interested in knowing about such an animal for my BX-22. It would help greatly with my carry-all and potential future implements.

 

[ronjhall]

Bill
I sure wish they had one available. /w3tcompact/icons/frown.gif
But they don’t have one at this time.

I’m hoping if they come out with a new model 2910 it will have many of the features that are on the new L series. Since the 2910 was first released in 2000 it may be a while before they come out with a new model.

Here is a link to a thread that will go over how to put a top n tilt together. <A target="_blank" HREF=http://www.tractorbynet.com/cgi-bin/compact/showthreaded.pl?Cat=&Board=owning&Number=200065&page=&view=&sb=&o=&vc=1#Post200065>Click Here</A>

 

[RobertN]

They buy the stuff aftermarket. At the rental shops around here, most have Gannon tip/tilt. Gannon would be the place to check, but be prepared no matter where you go for $$$. The independant/ Cub Cadet shop around the corner from me wants $900... I made my own, but still tied some bucks up in it.

There's so much variety in model and brand, with a relatively low volume. I can see wehere it's not an over the counter kit...

Tisco has pieces to make it, including a complete top link I think Prince makes a complete top link too. But, no one carries a complete setup.