Total hydraulic Loss

   / Total hydraulic Loss #32  
Here's the picture of mine.
The slot doesn't actually look that bad. Most of the mess appears to be residue from the pump tang. Clean that crap out and reassess. You might not even need a new driver.

//greg//
 
   / Total hydraulic Loss
  • Thread Starter
#33  
If you look closely, the center of the slot is what really has the damage. The tang was rounded off pretty good. The outside of the tang and the inside of the slot took the damage.

Where do I find this in the parts manual?
JM254Manual

Thanks.
 
   / Total hydraulic Loss #34  
i don`t see it listed there. if your nortrac manual is the same as mine its list on pages 210 & 211 and i think its item 36??? pictures and discription are a little vague or it could be the "liquid pump mounting kit"that has no# designation.tommy at affordable will know what you need.
 
   / Total hydraulic Loss
  • Thread Starter
#35  
Just an update: I finally got the time to put the new pump on. I started it up and the hydraulics instantly worked, and seemed good. Since I have no idea when the damage was done, I'm guessing my tractor came with some of the damage and it just got worse over time. It will be interesting to see what it's like next time I work it.
 

Tractor & Equipment Auctions

iDrive TDS-2010H ProJack M2 Electric Trailer Dolly (A51694)
iDrive TDS-2010H...
2005 INTERNATIONAL 9400I TANDEM AXLE SLEEPER TRUCK (A54313)
2005 INTERNATIONAL...
2016 FORD F-150XL SINGLE CAB TRUCK (A51406)
2016 FORD F-150XL...
2018 Chevrolet Tahoe SUV (A51694)
2018 Chevrolet...
2010 KMC 3376 Peanut Combine (A53473)
2010 KMC 3376...
2009 Lexus RX 350 SUV (A53424)
2009 Lexus RX 350...
 
Top