Buying Advice Tractor advice
- Thread starter cajuntoo
- Start date
- Views: 2244
BrettW
Platinum Member
Guys,
Just a follow up here.
If a tractor needs parts or repairs and the Vet dealer/owners decide it is not worth keeping, where do they get their parts from? Other used broken Yanmars lurking in the junk pile? If so then it might not be so bad unless that part is worn out as well, ie an old clutch. Many times on this forum a memeber wants a part and finds it from a junked Yanmar sitting on some lot waiting for parting out. It is still a risk I know.
If I could do it again, and I will some day, I'd buy from a dealer that I KNOW could do big repairs for me as I'm not good with a wrench. good luck, bw
Just a follow up here.
If a tractor needs parts or repairs and the Vet dealer/owners decide it is not worth keeping, where do they get their parts from? Other used broken Yanmars lurking in the junk pile? If so then it might not be so bad unless that part is worn out as well, ie an old clutch. Many times on this forum a memeber wants a part and finds it from a junked Yanmar sitting on some lot waiting for parting out. It is still a risk I know.
If I could do it again, and I will some day, I'd buy from a dealer that I KNOW could do big repairs for me as I'm not good with a wrench. good luck, bw
ebbtide
Member
This has been a great thread. Im also a newbie that has learned from this one.
mark777
Veteran Member
- Joined
- May 16, 2004
- Messages
- 1,300
- Location
- S.E Texas
- Tractor
- Ym1300d-1401D-1601D , 1610D & Massey Ferguson 1020
Yes, thats how its done. Other used, broken or scrap parts tractors. Admittedly, the Vietnam rebuilders are very clever utilizing everything available in making tractors run.
Miss-matched parts, by years and models make diagnosing problems very difficult when replacement parts are required.
Miss-matched parts, by years and models make diagnosing problems very difficult when replacement parts are required.
