Tractor no. 15 !! It will be Cat yellow and have TRACKS !
- Thread starter Waldon52
- Start date
- Views: 160521
OP
Waldon52
Platinum Member
Yes, I will widen the deck with some steel tubing . Tomorrow I should get the front axle and quik hitch built too. Then I have a second dolly that has also sat in my shed for many years unused. I will convert it also to a all terrain big tired vertical dolly / horizontal 4 wheel wagon . Even if I never use them they will sell better at a garage sell if I ever have one.
OP
Waldon52
Platinum Member
Here is the second dolly / wagon conversion , I ran out of steel though:thumbdown::thumbdown:
OP
Waldon52
Platinum Member
I finally got back to the shop and got the front and rear hitches built and painted. I still have 6 of the 20 in tall tires left so i will go ahead and build one more of these four wheel type quik-hitch style wagons. I will bolt plywood to the deck of each one and they should look cute hooked up behind the garden tractors. It will seem nice to have the tires being used instead of sitting in the corner of the shop. 
Xfaxman
Super Star Member
- Joined
- Feb 8, 2013
- Messages
- 12,875
- Location
- Guthrie, OK
- Tractor
- Toolcat 5610 G - Bobcat V417 - TORO+Loader
:thumbsup: Gooder-uns. 
farm boy00
Veteran Member
- Joined
- Jul 17, 2014
- Messages
- 1,297
- Location
- Howard City, MI
- Tractor
- John Deere M&MT, Case 1030 comfort king, Sears ST16, Craftsmen 6000, homemade articulation mini-loader
You use those carts At all yet
xcrider08
New member
Awesome Job Waldon52!!! Truly enjoyed looking through all the pages and tractors you have done. I really think I need to build a road grader like you got for my place. Just curious if have any other pics of that beast?
farm boy00
Veteran Member
- Joined
- Jul 17, 2014
- Messages
- 1,297
- Location
- Howard City, MI
- Tractor
- John Deere M&MT, Case 1030 comfort king, Sears ST16, Craftsmen 6000, homemade articulation mini-loader
I just got a craftsman lawn mower with a 4in lift and first thing i thought of is your grader And i thought about adding a blade to it
OP
Waldon52
Platinum Member
The grader is a crazy project, I should get it back in the shop soon and I will post more pics of it. I always loved grader blades on tractors. Not hauling hay yet on the little wagons.
Todays pics show two of the hat wagons almost done and yesterday I built the two axles for the third hay wagon. It seems nice to see 12 of my largest tires being used.
xcrider08
New member
Yes please do post more pic of the grader, I got envisions to build one now. lol Have a Kubota 3 cylinder diesel engine laying the shop that needs to be put to work.. think it would work great for this type of project.
